DescriptionCorby Bolts BrassThey are used for knife handle fasteners. With this design, you will create a step hole in your handle material that is slightly larger than the shank of the fastener. The two-part assembly allows for you to pass the shank precisely through your knife tang hole and handle material, allowing the larger radius of the Corby Bolt heads to create a pinch point on both sides of the handle material, where it can then be tightened down to a secure hold. Once the bolt has been tightened, it can be sanded to a flush finish with the handle surface. This will result in a smooth, pin-like visual effect on the final knife handle. When used with epoxy and/or thread-locker adhesive, they will create a permanent handle bond.Sold as one piece (1 male 1 female)Specifications for 1/4″” x 1L (.187 x 1L) Head Diameter = .250 in. (ea.) Head Length = .300 in. (ea.) Shank Diameter = .187 in. Shank Length = .350 in. Overall Length (min) = (1.0 in) Overall Length (max) = (1.2 in) Thread = US 6-40 Driver = Slot Material = Brass Corby Bolt = (1 male 1 female)Specifications for 5/16″ x 1 (.312 x 1L) Head Diameter = .312 in. (ea.) Head Length = .300 in. (ea.) Shank Diameter = .213 in. Shank Length = .350 in. Overall Length (min) = (1.09 in) Overall Length (max) = (1.32 in) Thread = US 8-32 Driver = Slot Material = Brass Corby Bolt = (1 male 1 female)Specifications for 5/16′ x 1.25L (.312 x 1.25) Specifications Head Diameter = .312 in. (ea.) Head Length = .300 in. (ea.) Shank Diameter = .213 in. Shank Length = .350 in. Overall Length (min) = (1.25 in) Overall Length (max) = (1.40 in) Thread = US 8-32 Driver = Slot Material = Brass Corby Bolt = (1 male 1 female)
