Description This professional grade Black Gloss Lacquer has been formulated to produce a deep black gloss finish in just two coats on most wooden surfaces. Dry and handleable in 10 to 20 minutes under normal conditions, it is possible to produce glass-like finishes within hours of application. Drying time may vary depending on ambient temperature and humidity. For a simple gloss finish, two coats will generally be enough over a properly sealed surface. Use our Microcrystalline Wax for a fingerprint resistant over coat. For a glass-like finish, we recommend four coats and then polish with pastes and creams. Apply two coats onto open grained woods like ash or woods with added texture and use our embellishing waxes over the top when dry to enhance the remaining grain or textured pattern. Basic Application: This deep black lacquer will produce a high strength gloss finish. These are the steps we recommend to get started. – Sand your work down smooth to at least 400 grit and ensure surface is free from dust, grease and moisture; – Prepare the surface well with a suitable sealer and ensure it has fully dried. We recommend our Pro Spray Sealer when using this product; – Shake can with the cap on for at least two minutes before use. Protect lathe and surfaces; – Avoid breathing spray – Use appropriate PPE and use in a well ventilated area; – Apply light coats 200mm from the piece, giving time for the lacquer to dry between coats. Two coats is usually sufficient; – Under normal conditions, this Professional Lacquer can be mechanically buffed in under 3 hours. – For a glass-like finish, use abrasive pastes and creams according to manufacturers instructions.
